Three-zone temperature shock chamber provides reliability tests and product screening tests for the safety performance testing of electronic components and other products, which mainly tests the specimen's performance parameters under the continuous shock of extremely high temperature and extremely low temperature in an instant, to examine its reliability and stability, then provide essential help for customers to carry out product quality control.
Model | HD-CTS3-1J | HD-CTS3-2J | HD-CTS3-5J | HD-CTS3-10J |
Internal volume | 120 L | 210 L | 504 L | 900 L |
Internal dimensions (D*W*H) | 400*500*600 mm | 500*600*700 mm | 700*800*900 mm | 900*1000*1000 mm |
External dimensions (D*W*H) | 1620*1460*2360 mm | 1720*1560*2460 mm | 2120*1820*2260 mm | 2420*2020*2660 mm |
High temperature zone | ||||
Preheating temperature upper limit | 200℃ | |||
Heating time | R.T～+200℃: 40min (approximately) | |||
Low temperature zone | ||||
Pre-cooling temperature lower limit | -75℃ | |||
Cooling time | R.T～-70℃: 90min (approximately) | |||
Working zone | ||||
Temperature range | High temperature: +60℃～+150℃; Low temperature: -55℃～-10℃; | |||
Temperature fluctuation | ≤±0.5℃ | |||
Temperature deviation | ±2℃ | |||
Temperature recovery time | ≤5 min | |||
Material | ||||
Shell material | Cold rolled sheet steel, spray plastics on surface | |||
Internal material | SUS304 Stainless steel | |||
Thermal insulation material | Glass wool or polyurethane foam | |||
Refrigeration system | ||||
Refrigeration mode | Mechanical compression, two-stage refrigeration | |||
Cooling mode | Air cooling / water cooling | |||
Compressor | International well-known brand | |||
Control system | ||||
Controller | Programmable controller, color LCD touch screen | |||
Communication interface | RS485, USB or LAN interface (Optional according to customer's requirements) | |||
Temperature sensor | Pt100 | |||
Power supply | AC380V±10%, 50±1Hz, three-phase four-wire + earth wire, ground resistance<4Ω | |||
