This equipment is suitable for testing the mechanical properties of metal materials, non-metallic materials and composite materials, as well as analyzing and researching process properties. Equipped with corresponding fixtures, it can be used for tensile, compression, bending, shear, tear, peel, burst and other tests. Parameters such as maximum test force, elongation, tensile strength, yield strength, compressive strength, elastic modulus, shear strength and tear strength can be automatically obtained. It is an ideal testing equipment for scientific research institutions, colleges and universities, industrial and mining enterprises, technical supervision agencies, commodity inspection and arbitration departments and other relevant organizations.
Model | WDW-50 | WDW-100 |
Max. testing force | 50 kN | 100 kN |
Accuracy | Class 0.5 | |
Testing force measurement range | 0.2%~100% F.S (Full scale) | |
Testing force indication error | Within±0.5% of the indicated value | |
Testing force resolution | 1/500000, no subsection | |
Deformation measurement range | 2%~100% F.S (Full scale) | |
Deformation indication error | Within±0.5% of the indicated value | |
Displacement resolution | 0.03 μm | |
Beam speed range | 0.001~500 mm/min, stepless speed regulation | |
Speed indication error | ±0.1% of the set speed | |
Stress and strain rate adjustment range | 0.005~500 FS/s | |
Stress and strain rate control accuracy | When the rate is <0.05% FS/s, it is within ±1% of the set value; When the rate is ≥0.05% FS/s, it is within ±0.5% of the set value; | |
Effective tensile space | 600 mm | |
Effective compression space | 700 mm | |
Effective test width | 600 mm | |
Fixture type | Manual, pneumatic, hydraulic | |
Overall dimensions | 1040*850*2200 mm | |
Weight | approximately 1100 kg | |
Power supply | 380 V±10%, 50 Hz | |
