Explosion-proof high low temperature humidity test chamber is used to simulate climatic and environmental tests such as temperature, humidity, temperature and humidity alternation, and to test the reliability of different types of pyrotechnics, batteries, flammable and explosive products, etc.
Model | TH7006HDF | TH701HDF | TH702HDF | TH705HDF | TH710HDF |
Internal volume | 64 L | 110 L | 252 L | 504 L | 1000 L |
Internal dimensions (D*W*H) | 400*400*400 mm | 450*450*550 mm | 600*600*700 mm | 700*800*900 mm | 1000*1000*1000 mm |
External dimensions (D*W*H) | 1240*850*1280 mm | 1151*880*1450 mm | 1510*800*1650 mm | 1764*1000*1850 mm | 2200*1200*1980 mm |
Temperature control mode | BTHC: Balanced temperature & humidity control | ||||
Working environment temperature | +5~+35 ℃ | ||||
| Performance | |||||
Temperature range | -70℃～+150℃ (high temperature: +180℃, optional); (ow temperature: -80℃, optional); | ||||
Humidity range | 20%～98% R.H. (low humidity: 10% R.H. optional) | ||||
Temperature fluctuation | ≤±0.5℃ | ||||
Temperature uniformity | ≤2.0℃ | ||||
Temperature deviation | ±2.0℃ | ||||
Humidity deviation | +2~-3%(>75%R.H.), ±5%(≤75%R.H.) | ||||
Heating and cooling rate | ≥1℃/min (-55℃~+85℃) | ||||
| Material | |||||
Shell material | Cold rolled sheet steel, spray plastics on surface | ||||
Internal material | SUS304 Stainless steel | ||||
Thermal insulation material | Glass wool or polyurethane foam | ||||
| Refrigeration system | |||||
Refrigeration mode | Mechanical compression, two-stage refrigeration | ||||
Compressor | International well-known brand | ||||
Refrigerant | R404A/R23 | ||||
Cooling mode | Air cooling | ||||
| Control system | |||||
Controller | Programmable controller, color LCD touch screen | ||||
Communication interface | RS485, USB or LAN interface (Optional according to customer's requirements) | ||||
Heater | Explosion-proof heating tube | ||||
Temperature sensor | Explosion-proof Pt100 | ||||
Blower | Explosion-proof centrifugal blower | ||||
Humidifier | SUS304 Stainless steel | ||||
Observation window | 240*240 mm | 260*350 mm | 400*470 mm or 400*500 mm | ||
Testing hole | On the left side wall, size: Ф80mm, silicone rubber sealing plug with metal cap (Or optional according to customer's requirements) | ||||
Power supply | AC380V±10%, 50±1Hz, three-phase four-wire + earth wire, ground resistance<4Ω | ||||
Optional |
2. Drawer type explosion-proof high low temperature (humidity) test chamber. 3. Non-standard customized explosion-proof high low temperature (humidity) test chamber. | ||||
