文章
  • 文章
  • 产品
Search

English


HOME >> Products Center(分类) >>Shock/ bump system >> Pneumatic bump test system
Product Detail

Pneumatic bump test system

Collect
Description:

KCT20 series pneumatic bump test system

KCT20 series pneumatic bump test system, has replaced the traditional mechanical cam type bump table, is applied to electronic components or devices and other electric and electronic products that are subjected to repetitive shock in use or transportation.


Functions and features:

◆ Full air pressure driving bump, clean and environmentally friendly, good repeatability and high reliability;

◆ The bump frequency can be controlled by adjusting the air pressure, the bump frequency is continuously adjustable, the system is more stable and reliable, the bump frequency is high, and the software operation is convenient;

◆ The test time and bump frequency times can be set arbitrarily, and the test system will automatically stop after the test is completed, which is convenient for users to operate;

◆ The controller has door protection, flywheel protection and zero signal protection, to ensure system safety;

◆ The drop height is adjustable. Use computer control measurement system. When the pulse width is fixed, you only need to input overload value, the drop height will be automatically adjusted by the computer, and the adaptive adjustment of the bump process can be realized, to ensure the repeatability of the bump overload.

 

Technical parameter:

Model 

KCT20-50

KCT20-100

KCT20-200

KCT20-500

KCT20-1000

KCT20-1500

KCT20-2000

Load (kg)

50kg

100kg

200kg

500kg

1000kg

1500kg

2000kg

Table size (mm)

500*

500

600*

600

800*

800

1000*

1000

1200*

1000

1200*

1200

1500*

1500

Shock waveform

Half sine wave

Peak acceleration (m/s2)

30~

1500

30~

1000

30~

1000

30~

1000

30~800

30~600

30~500

Pulse duration (ms)

30~2

30~2

30~3

30~6

30~6

30~6

30~6

Max.

frequency times (times/min)

120

120

100

80

80

60

60

Bump distance automatic adjustment (mm)

150 mm

150 mm

180 mm

180 mm

200 mm

200 mm

200 mm

Overall dimension

(mm)

1000*

1000*

1000

1100*

1100*

1000

1200*

1200*

1100

1300*

1300*

1200

1500*

1500*

1300

1500*

1500*

1300

1500*

1500*

1300

Weight (kg)

1000

1200

1500

2000

2500

3000

3500

Power supply requirements for Table

AC 220V±10%, 50Hz, 2kVA

Power supply requirements for Air compressor

AC 220V±10%, 50Hz, 3kVA or 

AC 380V±10%, three-phase, 50Hz, 5kVA

Air source conditions

Air source output pressure is not more than 1.0Mpa. 

If there is no air source in the lab, air compressor needs to be 

configured; 

If there is air source in the lab, and there is a high requirement on 

the bump frequency times, it needs to configure a corresponding 

air storage tank.

Environment 

Temperature: 0~40℃, humidity: ≤90% (25℃), non condense

Notes: Two kinds of configurations are for all models, ground foundation needed and ground foundation free, users can choose according to the requirements.

+86-29-89182431, +86-29-89194421
friday@hydescience.com
710065, Room 1906, Block E, Van Metropolis, Road Tangyan, Xi'an, China
Mobile version
About Hyde
Products Center
News
Products Service
Technical Support: 艺源科技 | Admin Login
×